#1 Appliance Repair in Bowie, MD
Appliance repair for Bowie homes and businesses: refrigerators, washers, dryers, ovens, dishwashers, and built in appliances, with published price ranges up front and a written figure before any work begins.
Your recent projects →
At Bowie Appliance Repair Company, we repair refrigerators, ovens, ranges, washers, dryers, and dishwashers for homeowners in Bowie, MD. Our days run through kitchens and laundry rooms across the city, from the original Belair streets to newer subdivisions in Woodmore and Fairwood. A fridge warming up overnight. A washer stopped mid cycle, full. Those calls shape the work.
Bowie is a homeowner city, with 58,383 residents and 83.9 percent of homes owned by the people who live in them, so appliances here get repaired rather than quickly replaced. The building waves of the 1990s and 2000s filled Woodmore, Fairwood, and Mitchellville with built in ovens, cooktops, and counter depth refrigerators now reaching repair age together. Replacing a built in often means cabinet work too, so a sound repair usually wins.
Older Belair homes run freestanding ranges and laundry pairs in basement utility rooms. Many houses keep a second refrigerator or freezer in the garage or basement, and those machines work hard through Bowie summers. Laundry drives the most urgency. A dead washer in a full family house cannot wait a week.


A freestanding refrigerator in Belair cooled its freezer well but left the fresh food section too warm. Testing found a failed evaporator fan and frost blocking air flow between the sections. The fan motor was replaced, the frost cleared, and temperatures in both sections were checked again after a full running cycle.


A counter depth built in refrigerator in Woodmore had stopped making ice, and its door seal let warm air in along one corner. The unit came out on its built in tracks so the water line could be reached without touching the cabinets. A failed inlet valve was replaced, the worn seal renewed, and the ice maker ran repeated cycles before the unit went back.


A washer in Fairwood filled normally, then refused to drain and left clothes sitting in grey water. Opening the drain path revealed a blocked pump, with a coin and a small sock caught at the inlet. The pump was replaced, the drain hose cleared and reseated, and the machine ran a full wash and spin cycle with no water left standing in the drum.
Most residential calls follow a familiar shape. One machine fails, the household bends around it for a day or two, and then a decision gets made. These are the services Bowie homeowners ask for most often.
A refrigerator rarely fails all at once. Food softens at the edges first, or a low hum becomes a rattle that was not there last month. We repair Whirlpool refrigerators, Samsung refrigerators, GE refrigerators, LG refrigerators, and Frigidaire refrigerators, separating cooling faults from air flow faults, since the two look alike from the kitchen. Fans, thermostats, defrost parts, and door seals cover most findings. Garage and basement second refrigerators get the same care.
An oven that heats unevenly ruins more than one meal. One side browns, the other stays pale, and soon nobody trusts the dial. Our work covers ovens that will not reach temperature, burners that will not light or stay lit, worn igniters, and sensors drifting with age. Every unit gets heated, held at temperature, and checked again before we finish.
The washer causes the fastest stress of any machine when it stops, and loads pile up in days, not weeks. Faults we see most include a washer that will not drain, a drum that will not spin, a front load door that will not lock, and leaks appearing partway through a cycle. The pump, hoses, and drive parts get checked, and the machine runs empty before clothes go back in.
A dryer tumbling without heat leaves a family with damp clothes and nowhere to put them. Heat faults usually trace to a heating element, a thermal fuse, or a vent run blocked badly enough to cook the inside of the machine. We also repair dryers that drum loudly, stop early, or need two cycles for one load. The vent gets checked on every heat call.
Water pooled at the door base. Glasses out gritty. A cycle that starts, hums, and gives up. Dishwasher faults sit mostly in the pump, the spray arms, or the parts controlling water in and out. We repair units that leak, refuse to drain, or leave dishes dirty after a full run. Built in models come out carefully so floors and cabinet faces stay unmarked.
Chest and upright freezers in garages and basements work hardest in summer, right when they hold the most food. A soft frost line on the lid, or a motor running without stopping, is an early warning worth acting on. Ice makers fail with stuck arms, blocked lines, and inlet valves that drip or refuse to fill. Temperatures get confirmed after the work, not guessed.
Cooktops in newer subdivisions sit flush in counters and islands, clean looking until a burner stops and the whole surface must come up. Glass tops, coil burners, and gas cooktops fail differently, so diagnosis changes with the type. One dead element may be the element or the switch behind its knob, and testing separates the two before parts are ordered.
A microwave running without heat, or one gone dark without warning, usually points to a door switch, a control board, or an internal fuse. Over the range models add a vent fan and lights, checked during the same visit. Safety comes first here, since internal parts can hold a charge after the plug is pulled. When age makes a repair unwise, we say so during diagnosis.
Bowie businesses lean on appliances quietly, but a failure lands fast. A cafe fridge drifting warm. An office kitchen with a dead dishwasher. These are the commercial calls we take across the city.
Restaurants, cafes, and small food shops depend on reach in coolers and prep units holding safe temperatures through a full service day. A unit drifting up a few degrees puts stock at risk long before cooling stops entirely. We diagnose compressors, fans, thermostats, and door seals, testing temperatures under working conditions rather than in an empty box.
Laundries, gyms, salons, and care settings run washers and dryers far harder than any house, and wear shows in pumps, belts, and heating parts. Our work covers repeated drain faults, heat failures, and machines stopping mid cycle under load. Units get tested with real loads afterward, since an empty drum can hide a fault a full one finds.
A range losing a burner mid service, or an oven that will not hold temperature on a busy night, changes what a kitchen can send out. We repair commercial ovens, ranges, and cooktops through igniters, gas valves, thermostats, and control parts. Testing runs at working temperature, held long enough to show the fault is gone.
Rentals turn over on tight schedules, and a dead dishwasher or cold refrigerator can hold up a move in. Managers send us faults sitting between one tenant leaving and the next arriving, plus mid tenancy failures that cannot wait. Findings come back in clear language a manager can pass along without rewriting, and each machine is tested before the visit ends.
The cards below follow the shape of recent work in Bowie neighborhoods. Each names the repair type, where it took place, when, and what the finished repair cost.
The drain pump had weakened, and the hose held a partial blockage near the sink connection. Both faults were corrected during the visit. The machine then ran two full cycles with complete drainage before the work was closed.
Testing pointed to a failed heating element, and the vent run behind the machine was packed with lint at its first bend. The element was replaced and the vent cleared. A timed load then dried fully in one cycle.
Its temperature sensor had drifted, and the lower element showed a visible weak spot. Both parts were replaced during the visit. The oven was then heated and checked at two temperatures to confirm even baking.
The freezer door seal had split along its lower edge, letting humid summer air in around the clock. The seal was renewed and built up frost cleared. Freezer temperature and ice production were both confirmed on a return check.
One element had failed outright, and the other traced to a worn switch behind its control knob. Both parts were replaced during the visit. All four elements were then run in turn during testing.
Worn shock absorbers were found on both sides of the drum, and the drain filter held lint and small items. The absorbers were replaced and the filter cleaned. A full load then ran a high spin without excess movement.
Plenty of repair work looks simple from the outside. The difference shows in how a job gets diagnosed, what goes into the machine, and whether the same fault returns a month later.
Every job begins with the quote form at the bottom of this page, where you name the appliance, describe the fault, and add a little about the home. A diagnostic visit follows, built around testing rather than guessing, so the faulty part is identified before repair money is committed. Findings come in plain language, with what the repair involves and what it will cost, and work starts only once that picture is clear. Afterward the appliance runs a full cycle in front of you.
Replacement parts decide how long a repair lasts, so parts we fit match the specifications of the component that came out. Heating elements, pumps, fan motors, igniters, thermostats, and control boards are matched to the model, not picked as close enough. Door seals are chosen for the exact door, so cold air stays in the box. Dishwasher and ice maker supply lines are braided stainless, and worn hoses, clamps, and fittings get renewed where age shows.
Most repairs start with the diagnostic visit, and a straightforward fault with a part on hand can often finish during that visit. When a part must be ordered, a return visit follows once it arrives. Built in refrigerators and ovens take a little longer, since the unit must come out and go back without damage to surrounding cabinets. Expect the work area protected, the fix explained as the job goes, and a real test cycle before anyone packs up.
No Bowie appliance repair company publishes a local price list, and we are no exception, so the figures below come from published guides and are labeled that way. They show what repairs run nationally and how the appliance groups compare. Your figure depends on the fault, the part, and the machine.
Published guides put the average appliance repair at about $179 per job, with a typical range of $108 to $251. Faults near the lower end usually involve one accessible part, such as a switch, a fuse, or a belt. Work near the upper end tends to involve cooling systems, control boards, or machines taking longer to open and test. Two refrigerators with the same symptom can need very different parts.
Published guides break averages down by group. Refrigeration repairs average about $255, since cooling faults can involve fans, defrost systems, sealed parts, and long temperature testing afterward. Cooking repairs average about $214, across igniters, elements, sensors, and controls. Laundry repairs average about $184, mostly pumps, belts, heating elements, and motors. A built in refrigerator usually sits above the refrigeration average, because access and testing take longer.
A diagnostic visit commonly runs $75 to $125 in published figures, usually credited toward the repair when work goes ahead. The visit finds the real answer, since one symptom like a warm fridge can trace to half a dozen parts. Proper testing first protects you from paying for the wrong repair. If a machine is not worth repairing, you still leave with a clear finding and its reason.
The part moves the price first. A pump and a control board live in different worlds, and a compressor sits beyond both. Access comes next, since a freestanding Belair range takes minutes to reach, while a built in oven needs careful removal before work starts. Age matters quietly, because older machines sometimes need a part located rather than simply ordered.
From our base in Bowie, we serve homeowners and businesses across the surrounding ring in Prince George's County and Anne Arundel County. The ring includes Glen Burnie, Severn, Odenton, Annapolis, and Severna Park, plus College Park, Pasadena, Laurel, Crofton, and South Laurel. It continues through Greenbelt, Arnold, Beltsville, Glenn Dale, Kettering, Largo, Lanham, Mitchellville, Edgewater, and Fort Meade, where our work serves the off post community only.
Tell us which appliance has stopped doing its job. The quote form at the bottom of this page asks for your name, contact details, the appliance and its fault, and a short note about your home. Send it in, and we will come back with the next step toward a diagnostic visit.
Published guides put the average appliance repair at about $179 per job, with a typical range of $108 to $251. Refrigeration repairs average about $255, cooking repairs about $214, and laundry repairs about $184, while a diagnostic visit commonly runs $75 to $125, usually credited toward the repair. Your figure depends on the fault and the part, which the diagnostic visit pins down.
Age, fault, and the cost of the fix are the three things to weigh. A machine early in its working life with one failed part is usually a sound repair, while repeated faults in an older unit point the other way. Built in models tilt toward repair in Bowie, since replacing one often means cabinet work on top of the new appliance.
We start with what you have noticed, when the fault shows up, and anything the machine does before it fails. Testing follows, panels opened where needed, suspect parts checked one by one until the fault is found. You get the finding in plain language, what the repair involves, and what it will cost.
Yes, and Bowie keeps us busy with both. Subdivisions built through the 1990s and 2000s, including Woodmore, Fairwood, and Mitchellville, are full of built in ovens, cooktops, and counter depth refrigerators reaching repair age together. Units come out on their tracks or mounts so cabinets stay protected. Each gets tested in place afterward, running real cycles before the job closes.
We repair Whirlpool appliances, Samsung appliances, GE appliances, LG appliances, Frigidaire appliances, Maytag appliances, Bosch appliances, and KitchenAid appliances as regular service lines. That covers most brands fitted in Bowie kitchens and laundry rooms, from older Belair ranges to built in suites in newer subdivisions. For another brand, name it in the quote form and we will say plainly whether we work on it.
The form at the bottom of this page asks for your name, contact details, the service you need, and a short message about the appliance and its fault. Sending it starts every repair we book, from one diagnostic visit to a larger built in job. We respond with follow up questions that sharpen the picture, then arrange the visit.
Tell us which appliance is failing and how. We read every request that comes in and respond with the published range for that kind of repair and the next step, starting with a diagnostic visit to confirm the fault.
Prefer to talk it through first? Send the form and we will call you back at the number you give us.